A485 – AMD Kit Driver 25.20.1401.6.1 – "Radeon settings version and Driver version do not match" bug

On both of my A485, I was attempting to update to the newly released AMD 25.20.1401.6.1 drivers, but upon updating, the Radeon tool was unable to launch with the error:

 

"Radeon settings version and Driver version do not match".

 

To fix this, I had to delete the value in registry key HKEY_LOCAL_MACHINESOFTWAREAMDCNDriverVersion

 

It seems the installer doesn’t correctly update the registry key

 

Ideapad 110 15isk – Boot Failure

Running Windows 10 on a Lenovo Ideapad 110-15isk. Laptop is close to three years old. Has a RAM upgrade.

A few days ago, my laptop gave me the blue screen of death, with “Unexpected store exception” as the error. It has not been able to boot up since.

I have tried:

– Restarting

– Removing RAM add-in and putting in the original component

– Re-installing Windows from a USB partition. A fresh install either fails, gets stuck at “Getting Files Ready For Installation”, or doesn’t show any partition drives except for “Drive 0 Unallocated Space”, with a total size of 0.0 mb.

– Doing a system restore. It gives me an error: “To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.”

– Doing system image recovery. Gives me an error that says, “Windows cannot find a system image on this computer.”

– Tried startup repair. Gives me, “Could not repair your PC”. No log file

– Tried bootfix in command. Tells me access is denied.

Hard drive shows up in BIOS. Disk check shows no errors. RAM test, both with and without RAM upgrade, shows no errors.

I feel like I’ve literally tried everything. I know i’m probably beating a dead horse, but I’m broke and in the middle of school, so I’m desperately trying to fix it. Can anybody help?

File app not working in lenovo k8 plus

T480 – FIngerprint scan = "soft Crash" of win10

2. time this has happened, 10 weeks old machine. Installed with lenovos own OS.
just updated.

 

Windows 10 1809 fully patched, same with lenovo updater – Cannot not get back into the machine. Hard reset is needed 🙁

Scanning fingerprint to unlock windows = Blue screen, not BSOD, just blue background with mouse working.
Machine is working, spawning new events in event logger.

Crash is this ID in system.

 

Critical    24-01-2019 14:49:41    DriverFrameworks-UserMode    10110    User-mode Driver problems.

"A problem has occurred with one or more user-mode drivers and the hosting process has been terminated.  This may temporarily interrupt your ability to access the devices."

 

Followed by this event id

 

Critical    24-01-2019 14:49:41    DriverFrameworks-UserMode    10111    User-mode Driver problems.

"The device HID-compliant headset (location (unknown)) is offline due to a user-mode driver crash.  Windows will attempt to restart the device 5 more times.  Please contact the device manufacturer for more information about this problem."

 

Followed by continius events of these 2

 

Log Name:      System
Source:        Microsoft-Windows-Smartcard-Server
Date:          24-01-2019 14:49:42
Event ID:      610
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      PCNAMExxxxx
Description:
Smart Card Reader ‘Microsoft UICC ISO Reader da87b561 0’ rejected IOCTL TRANSMIT: Access is denied.  If this error persists, your smart card or reader may not be functioning correctly.

Command Header: 00 a4 04 00
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Smartcard-Server" Guid="{4FCBF664-A33A-4652-B436-9D558983D955}" EventSourceName="SCardSvr" />
    <EventID Qualifiers="0">610</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2019-01-24T13:49:42.652709900Z" />
    <EventRecordID>11378</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>PCnamexxxxxx</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="Message">Access is denied.</Data>
    <Data Name="Reader">Microsoft UICC ISO Reader da87b561 0</Data>
    <Data Name="IOCTL">TRANSMIT</Data>
    <Data Name="CommandHeader">00 a4 04 00</Data>
  </EventData>
</Event>

Log Name:      System
Source:        Microsoft-Windows-Smartcard-Server
Date:          24-01-2019 14:49:42
Event ID:      610
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      PCNAMExxxxx
Description:
Smart Card Reader ‘Microsoft UICC ISO Reader da87b561 0’ rejected IOCTL TRANSMIT: The parameter is incorrect.  If this error persists, your smart card or reader may not be functioning correctly.

Command Header: 00 ca 7f 68
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Smartcard-Server" Guid="{4FCBF664-A33A-4652-B436-9D558983D955}" EventSourceName="SCardSvr" />
    <EventID Qualifiers="0">610</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2019-01-24T13:49:42.607121300Z" />
    <EventRecordID>11377</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>PITNBPMKWIN10</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="Message">The parameter is incorrect.</Data>
    <Data Name="Reader">Microsoft UICC ISO Reader da87b561 0</Data>
    <Data Name="IOCTL">TRANSMIT</Data>
    <Data Name="CommandHeader">00 ca 7f 68</Data>
  </EventData>
</Event>

2 External Monitors on L560

Hello

 

I’m having trouble using two external monitors with my L560.

 

One monitor is connected with VGA to VGA, another monitor is connected with DP to HDMI.

 

When both are connected the VGA connected monitor functions, but there is not connection detected with the other monitor. When the VGA is disconnected, the DP-HDMI functions (so there seems to be no issue with the cable and ports etc.).

 

The "Extend" setting (press F7) uses the Laptop monitor and one external monitor. Ideally I want the laptop screen to be blank and the display extended across the 2 external monitors.

 

Does anyone have any ideas how to resolve the matter? Do I need a Docking station?

 

Any advice is much appreciated

Michael

 

Any help

We will be happy to hear your thoughts

Leave a reply

dynserv
Logo
Enable registration in settings - general